Our Microsoft MB-320 dumps are key to get success. More than 80000+ success stories.
Clients Passed Microsoft MB-320 Exam Today
Passing score in Real Microsoft MB-320 Exam
Questions were from our given MB-320 dumps
A company is implementing Dynamics 365 for Finance and Operations in their manufacturing environment.The manufacturing process uses formulas to direct material consumption on the batch orders.During production some items in the formula must be consumed automatically from the production area, whilesome must be picked with their actual consumption reported on a pick list.You need to determine which setup method is used for formula lines to allow for the desired mixed methodpicking processes.What are two possible ways to achieve this goal? Each correct answer presents a complete solution.NOTE: Each correct selection is worth one point.
A. Leave the flushing principle blank on formula lines and set resource consumption to direct flushing principleof materials based on consumption method for the line.
B. Leave the flushing principle blank on formula lines and set the default start value to Always for AutomaticBill of Material Consumption.
C. Leave the flushing principle blank on formula lines and set default flushing principle on the items based onconsumption method for the item.
D. Set the flushing principle on each formula line based on consumption method for the line.
You produce 100 total units of finished goods. The amount of material used to produce the goods is the equivalent amount of material needed to produce 105 finished goods. The company must track variances in material compared to the original estimated amount You must only use one picking list journal for each production order. You need to post a picking list that accounts for the material required to produce 105 finished goods. What should you do?
A. Report as finished five additional units in the error quantity field.
B. Post a picking list for 100 to account for the originally estimated amount.
C. When creating the lines for a picking list, set the value of the quantity option to 105.
D. Post a picking list for 100 to account for the originally estimated amount. Post an additional picking list to account for the equivalent amount of material to produce 5 finished goods.
A Discrete manufacturing company produces speakers. The high-end speaker model uses protective rubber strips on the edges.Approximately five inches of rubber is consistently scrapped in the production process, regardless of production quantity. Workers manually consume the extra material on the picking list or scrap it in an inventory journal. kYou need configure the system to automatically account for this scrap on the Bill of materials (BOM).What should you do?
A. Increase the required quantity of the rubber component by five on the BOM.
B. Set a Variable scrap of five percent for the rubber BOM line.
C. Add an additional BOM line for five inches and set consumption to Variable.
D. Set a Constant scrap of five on the BOM line for rubber.
A company sells large batches of chemicals. Item specifications vary from batch to batch.You must fulfill multiple orders from the same batch of chemicals. If a single batch cannot be reserved, manual reservation must be used. The system must also make reservations based on the earliest batch receipt date.You need to set up a new chemical item that automatically uses the new batch reservation logic.Which three settings should you configure? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.
A. In the Tracking dimension group, select Coverage plan by dimension for batch number.
B. In the Item model group, select FEFO date-controlled.
C. In the Item model group, select the FIFO inventory model.
D. In the Item model group, select Same batch reservation and Consolidate requirements.
E. In the Storage dimension group, select Coverage plan by dimension for the site and warehouse dimensions.
A company implements Dynamics 365 for Finance and Operations.Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company. You have the following requirements:• Locate a supermarket at the subcontractor building.• Support picking and shipping activity tracking.• Associate costs of transporting materials between the locations in the cost of the finished product.You need to modify the production flow.A company implements Dynamics 365 for Finance and Operations.Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company. You have the following requirements:• Locate a supermarket at the subcontractor building.• Support picking and shipping activity tracking.• Associate costs of transporting materials between the locations in the cost of the finished product.You need to modify the production flow.Which three actions should you perform? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.
A. Modify the tumble polish activity and assign it to the subcontractor.
B. Create transfer activities and assign thereto the subcontractor.
C. Create a resource and work cell resource group for the subcontractor.
D. Create a new production flow version.
E. Modify the tumble polish operation and associate it with the subcontractor.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.You need to ensure that the engineering change takes affect at the end of the month.Solution:1.) Edit the existing step number two activity to be the new engineering process2.) Edit the existing production flow. Set the expiration date due to the end of the month3.) Edit the existing Kanban rule. Set the expiration date to the end of the month4.) Activate the production flowDoes the solution meet the goal?
You are the lead product design engineer at a plastics manufacturing company. You implement a new processthat uses a single tool to produce three finished goods at the same time.You need to set up the planning item number and formula to correctly to manufacture the three items.Which three actions should you perform? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.
A. Create item number for planning item and the associated formula
B. Add minimum and maximum quantities on formula
C. Add a coverage group to the formula
D. Assign co-products to the formula
E. Specify each of the finished good items as co-products
You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item. This item has the following Lean setup:• The setup uses a Lean schedule group with a throughput ratio = 2.• The process activity tied to production flow has the following runtime activity times: time = 3 min, per quantity = 1.• The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8 hour day).• The throughput is 10 per hour.You need to set up a Discrete operation to mirror the item's production flow activity.
A. Create a route with a runtime = 1, a process quantity = 1, and the operation's hours/time = 0.0167 (e.g. 1 hour/ 60 minutes).
B. Create a route with a runtime = 1, a process quantity = 10, and the operation's "hours/time = 1.
C. Create a route with a runtime = 6, a process quantity = 1, and the operation's hours/time = 1.
D. Create a route with a runtime = 1, a process quantity = 6, and the operation's hours/time = 1.
A manufacturing plant uses Lean manufacturing. Operators process Kanban consumption manually by using a mobile device.The production team must use automatic empty registration for some of the event Kanbans. Registration must occur when the last job of a Kanban is completed.You need to update the Kanban rule to meet this requirement.What Kanban setting should you update?
A. Select to register as empty when the source requirement is registered.
B. Select to register as empty when handling units are received.
C. Select to manually register as empty.
D. Set a fixed Kanban quantity.
A company produces homeopathic lotions for pain relief and uses Dynamics 365 for Finance and Operations.You have replaced the vendor of a product’s active ingredient with a new vendor. The new vendor is supplyingthe ingredient at a higher concentration of 25 percent.The previous vendor concentration was 15 percent. You are consistently running out of two of thecomplimentary ingredients.You need to update the formula and ingredient settings to allow for better order planning.What should you do?
A. Modify the factor value of the compensation principle
B. Modify the minimum and maximum value of the attribute for the active ingredient
C. Modify the target value of the attribute for the compensating ingredients
D. Modify the target value of the attribute for the active ingredient