Easy & Quick Way To Pass Your Any Certification Exam.

Cisco 300-815 Exam Dumps

Implementing Cisco Advanced Call Control and Mobility Services (CLACCM)

( 1271 Reviews )
Total Questions : 242
Update Date : July 16, 2026
PDF + Test Engine
$65 $95
Test Engine
$55 $85
PDF Only
$45 $75

Recent 300-815 Exam Results

Our Cisco 300-815 dumps are key to get success. More than 80000+ success stories.

39

Clients Passed Cisco 300-815 Exam Today

90%

Passing score in Real Cisco 300-815 Exam

91%

Questions were from our given 300-815 dumps


300-815 Dumps

Dumpsspot offers the best 300-815 exam dumps that comes with 100% valid questions and answers. With the help of our trained team of professionals, the 300-815 Dumps PDF carries the highest quality. Our course pack is affordable and guarantees a 98% to 100% passing rate for exam. Our 300-815 test questions are specially designed for people who want to pass the exam in a very short time.

Most of our customers choose Dumpsspot's 300-815 study guide that contains questions and answers that help them to pass the exam on the first try. Out of them, many have passed the exam with a passing rate of 98% to 100% by just training online.


Top Benefits Of Cisco 300-815 Certification

  • Proven skills proficiency
  • High earning salary or potential
  • Opens more career opportunities
  • Enrich and broaden your skills
  • Stepping stone to avail of advance 300-815 certification

Who is the target audience of Cisco 300-815 certification?

  • The 300-815 PDF is for the candidates who aim to pass the Cisco Certification exam in their first attempt.
  • For the candidates who wish to pass the exam for Cisco 300-815 in a short period of time.
  • For those who are working in Cisco industry to explore more.

What makes us provide these Cisco 300-815 dumps?

Dumpsspot puts the best 300-815 Dumps question and answers forward for the students who want to clear the exam in their first go. We provide a guarantee of 100% assurance. You will not have to worry about passing the exam because we are here to take care of that.


Cisco 300-815 Sample Questions

Question # 1

An engineer is troubleshooting local ringback on a Cisco SIP gateway The gateway is not ignoring the SIP 180 response with SDP from the service provider, and the far end device is sending the 180 with SDP to play ringback from the IP address specified m the SDP Which configuration change must be made on the gateway to resolve the issue?

A. Router(conf-voi-serv)# dlisable-early-media 180  
B. Router(conftg-sip-ua)# disable-early-media 180
C. Router(con(-voi-serv)# no disable-early-media 180
D. Router(config-sip-ua)# no disable-early-media 180



Question # 2

If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern “123”?

A. 12!
B. 12X (urgent priority set)
C. 1XX (urgent Priority Set)
D. 12[2-5] 



Question # 3

An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which two debugs must the administrator turn on? (Choose two). 

A. debug H.245 asn1
B. debug H.323 message
C. debug H.225 asn1
D. debug H.225 media
E. debug H.323 asn1



Question # 4

A user reports when they press the services key they do not receive a user ID and password prompt to assign the phone extension. Which action resolves the issue?

A. Create the default device profiles for all phone models that are used.
B. Subscribe the phone to the Cisco Extension Mobility service. 
C. Create the end user and associate it to the device profile.
D. Assign the extension as a mobile extension.



Question # 5

Users are reporting that several inter-site calls are failing, and the message "not enough bandwidth" is showing on the display. Voice traffic between locations goes through corporate WAN. and Call Admission Control is enabled to limit the number of calls between sites. How is the issue solved without increasing bandwidth utilization on the WAN links?

A. Disable Call Admission Control and let the calls use the amount of bandwidth they require.
B. Configure Call Queuing so that the user waits until there is bandwidth available
C. Configure AAR to reroute calls that are denied by Call Admission Control through the PSTN.
D. Reroute all calls through the PSTN and avoid using WAN.



Question # 6

An engineer is configuring Cisco UCM lo forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken to accomplish this task?

A. Configure device pools.
B. Configure service parameters
C. Configure enterprise softkeys.
D. Configure class of control



Question # 7

A customer routes PSTN calls to ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer's extension is four digits. Which action should be taken to route the incoming calls to four-digit extensions? 

A. Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
B. Set the Significant Digits to 4 on the SIP trunk.
C. Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
D. Set the Significant Digits to 8 on the SIP trunk.
E. Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
F. Set the Significant Digits to 4 on the SIP trunk.
G. Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
H. Set the Significant Digits to 8 on the SIP trunk. 



Question # 8

Which IOS command creates a SIP-enabled dial peer? 

A. voice dial-peer 20 sip
B. dial-peer voice 20 voip
C. dial-peer voice 20 pots
D. dial peer voice 20 sip



Question # 9

A company has an SRST gateway running an IOS XE image. The company plans to enable the IPv6 addressing companywide. To enable the IPv6 in a unified SRST gateway to support SIP phones, what are two supported supplementary features for an IPv6 fallback scenario? (Choose two.)

A. three-way conference
B. secure SIP lines
C. T.38 fax relay
D. transcoding
E. SIP trunk



Question # 10

Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally. What are two possible solutions? (Choose two.)

A. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767
B. Ask the firewall administrator to change the ports to TCP.
C. Ask the firewall administrator to change the range of UDP ports to 16384-32767. 
D. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 20000-22000.
E.Go to System Parameters in Cisco Unified Communications Manager and change the range of media ports to 20000-22000.



Question # 11

An engineer must implement call restriction to toll-free numbers using a class of restriction in a branch Cisco UCME. In which two places is the corlist incoming or cor Incoming command configured? (Choose two.) 

A. "ephone-dn' configuration mode
B. "voice register global" configuration mode
C. "telephony-service" configuration mode
D. "voice register pool" configuration mode
E. "dial-peer cor custom" configuration mode



Question # 12

An administrator discovers that employees are making unauthorized long-distance and international calls from logged-off Extension Mobility phones when the authorized users are away from their desks Which two configurations should the administrator configure in the Cisco UCM to avoid this issue? (Choose two.)

A. Remove the long-distance & international pattern's partitions from the calling search space of the physical phone.
B. Add the long-distance & international pattern's partitions to the calling search space of the physical phone's directory number.
C. Remove the long-distance & international pattern's partitions from the calling search space of the device profile.
D. Add the long-distance & international pattern's partitions to the calling search space of the physical phone.
E. Add the long-distance & international pattern's partitions to the calling search space of the device profile