Easy & Quick Way To Pass Your Any Certification Exam.
Cisco 300-425 Exam Dumps
Designing Cisco Enterprise Wireless Networks (ENWLSD)
Recent 300-425 Exam Results
Our Cisco 300-425 dumps are key to get success. More than 80000+ success stories.
Clients Passed Cisco 300-425 Exam Today
Passing score in Real Cisco 300-425 Exam
Questions were from our given 300-425 dumps
300-425 Dumps
Dumpsspot offers the best 300-425 exam dumps that comes with 100% valid questions and answers. With the help of our trained team of professionals, the 300-425 Dumps PDF carries the highest quality. Our course pack is affordable and guarantees a 98% to 100% passing rate for exam. Our 300-425 test questions are specially designed for people who want to pass the exam in a very short time.
Most of our customers choose Dumpsspot's 300-425 study guide that contains questions and answers that help them to pass the exam on the first try. Out of them, many have passed the exam with a passing rate of 98% to 100% by just training online.
Top Benefits Of Cisco 300-425 Certification
- Proven skills proficiency
- High earning salary or potential
- Opens more career opportunities
- Enrich and broaden your skills
- Stepping stone to avail of advance 300-425 certification
Who is the target audience of Cisco 300-425 certification?
- The 300-425 PDF is for the candidates who aim to pass the Cisco Certification exam in their first attempt.
- For the candidates who wish to pass the exam for Cisco 300-425 in a short period of time.
- For those who are working in Cisco industry to explore more.
What makes us provide these Cisco 300-425 dumps?
Dumpsspot puts the best 300-425 Dumps question and answers forward for the students who want to clear the exam in their first go. We provide a guarantee of 100% assurance. You will not have to worry about passing the exam because we are here to take care of that.
Cisco 300-425 Sample Questions
Question # 1A university lecture hall has a Cisco wireless high-density network with this configuration:• 5 GHz only• 20-MHz channels• UNII-1, UNII-2, and UNII2-E channels• TPC minimum = 8• TPC maximum = 14The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas.Which feature must be included in the design to mitigate and reduce high-channelutilization from rogue APs?
A. band select
B. DFS detection
C. RxSOP
D. 802.11w
Question # 2
A company is upgrading its wireless infrastructure and is in a state of transition. Some partsof the company’s building still run on the legacy WLC. The new WLC is not located at thesame site as the legacy WLC. The company requires seamless client inter-controllerroaming between the new WLC and the legacy WLC, with no disruptions. Both WLCs areseparated by firewalls. Which troubleshooting command validates that the mobility controlpackets between the WLCs can be sent and received?
A. mapping mobility_peer IP address
B. debug mobility handoff enable
C. debug mobility con¬g enable
D. mapping mobility_peer_management IP address
Question # 3
When a wireless network is designed for location services, how many APs must be heardby each location-ready AP at a signal level of -75 dBm or better?
A. three APs
B. no more than three APs
C. two APs
D. at least four APs
Question # 4
Which statement about AP failover priority for access points when configured with priority 1or 4 is true?
A. When configured with priority 1, the access point is assigned with the highest prioritylevel and it is marked as critical. This access point fails over before other access pointswith the lower priority when there is primary controller failure.
B. When configured with priority 4, the access point is assigned with the highest prioritylevel and it is marked as critical. This access point fails over before other access pointswith the lower priority when there is primary controller failure.
C. When configured with priority 4, the access point is assigned with the lowest prioritylevel and it is marked as low. This access point fails over after other access points with thehigher priority when there is primary controller failure.
D. When configured with priority 1, the access point is assigned with the medium prioritylevel and it is marked as medium. This access point fails over after other access points withthe higher priority when there is primary controller failure.
Question # 5
A company has 10 access point licenses available on their backup Cisco WLC and theirprimary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7access points are set to critical failover priority. During a failure, not all critical access pointsfailed over to the backup Cisco WLC. Which configurationis the cause of this issue?
A. The high priority access point is oversubscribed.
B. network ap-priority is set to enable.
C. The critical priority access point count is oversubscribed.
D. network ap-priority is set to disable.
Question # 6
A university lecture hall has high client density. Which antenna type is most appropriate toreduce co-channel interference and improve coverage?
A. High-gain directional antennas
B. Omni-directional antennas
C. Patch or panel directional antennas
D. Yagi antennas
Question # 7
Which IEEE standard enables Fast BSS Transition (FT) for seamless roaming?
A. 802.11k
B. 802.11r
C. 802.11v
D. 802.11ac
Question # 8
Which survey type uses predictive modeling software instead of physically visiting the site?
A. Passive survey
B. Predictive survey
C. Active survey
D. Post-deployment survey
Question # 9
An engineer performs a Layer 1 survey by using Metegeek chanalyzer only on the currentoperating channel. Which operating mode is configured for a Cisco CleanAIR AP?
A. Local
B. Sniffer
C. Monitor
D. SE-connect
Question # 10
Why is 802.11a connectivity reduced in an X-ray room?
A. X-rays create significant non-Wi-Fi interference on the 802.11a band.
B. X-rays impact the 802,11a UNll-2 channels that cause access points to dynamicallychange channels.
C. X -rays within these rooms cause multipath issues.
D. X-ray rooms exhibit increased signal attenuation.
Question # 11
A wireless engineer must optimize RF performance for multiple buildings with multipletypes of construction and user density. Which two actions must be taken? (Choose two.)
A. Configure Flexconnect groups for each building.
B. Configure WMM profiles for each building.
C. Configure AP groups for each area type.
D. Configure RF profiles for each area type.
E. Enable DTPC on the network.
Question # 12
Which design consideration is most important for real-time applications such as voice andvideo over WLAN?
A. High data rates
B. Low latency and jitter
C. Maximum throughput
D. Use of DFS channels
Question # 13
An engineer is designing an outdoor mesh network to cover several sports fields. The coreof the network is located in a building at the entrance of a sports complex. Which type ofantenna should be used with the RAP for backhaul connectivity?
A. 5 GHz. 8-dBi omnidirectional antenna
B. 2.4 GHz. 8-dBi patch antenna
C. 2.4 GHz. 14-dBi omnidirectional antenna
D. 5 GHz. 14-DBi patch antenna
Question # 14
Which design document contains detailed RF coverage maps, AP placement, and antennaorientation?
A. Low-Level Design (LLD)
B. High-Level Design (HLD)
C. BOM
D. Network topology diagram